MODEL No. Dimensions [mm] Weight [Gms.]
DTM-772 72 x 72 x 65 250
DTM-992 96 x 96 x 65 300
MODEL No. Dimensions [mm] Display Height
DTM-772 72 x 72 x 65 0.56"
DTM-992 96 x 96 x 65 0.56"

DTM-XX2 Series


Features

  • Low cost, Effective, Easy to use Pushwheel based Digital timer
  • Programmable ON Delay/Interval mode via DIP switch
  • Multiple Time Range: From 0.1 Sec. to 99 Hrs.
  • Time Setting via High Quality Push wheel switches
  • Universal supply voltage ranges from 90 To 270 VAC
  • 2-Digits, Single Row Display
  • High Accuracy: 0.05% of Full scale (Repeat Accuracy: 0.01%)
  • Time base selection via DIP switches
  • Configuration at power on (To prevent unauthorized tampering)
  • Available in 2 Standard DIN sizes
  • Specification

    DTM-2D
    Series Economical keyboard Counter
    Display Type 7 segment LED
    No. of Digits 4 Digits, Single Row
    LED Indication Output Status ; Batch/AR Time
    Dimensions Table no : 1
    Input Specification
    Start Input Power On, Pulse (Edge Trigger),Front Start (Programmable)
    Reset Input Front Key & Rear Terminal (Potential free)
    Accuracy Setting : 0.05% of Full scale Repeat : 0.01%
    Output Specification
    No. Of Outputs 2
    Output 1 Relay / SSR Factory settings
    Relay Contact Rating 5 A @ 250V AC/30V DC resistive
    SSR 12 VDC @ 50mA
    Output 2 Relay / SSR Factory settings
    Relay Contact Rating 5 A @ 250V AC/30V DC resistive
    SSR 12 VDC @ 50mA
    Configuration Parameters
    Delay Modes On Delay/Interval
    Time Range 9.9 Sec ; 99 Sec
    9.9 Min ; 99 Min
    9.9 Hrs ; 99 Hrs
    Timing Accuracy 0.05 % Full scale
    Front Panel Reset Enable only
    Output 2 Configurable Auxiliary Contact
    General Specification
    Supply Voltage 90 - 270 VAC/DC
    24 VAC/DC (OPTIONAL)
    Temperature Operating 0 - 50°C
    Storage -20° to 75°C
    Humidity (Non-condensing) 95 % RH
    Weight
    Table no : 2