MODEL No. Dimensions [mm] Weight [Gms.]
KTM-446 48 x 48 x 110 110
KTM-666 96 x 48 x 65 180
KTM-776 72 x 72 x 65 180
KTM-886 48 x 96 x 65 180
KTM-996 96 x 96 x 65 220
MODEL No. Dimensions [mm] Display Height
Upper Lower
KTM-446 48 x 48 x 110 0.28” 0.28”
KTM-666 96 x 48 x 65 0.56” 0.39”
KTM-776 72 x 72 x 65 0.56” 0.39”
KTM-886 48 x 96 x 65 0.56” 0.39”
KTM-996 96 x 96 x 65 0.56” 0.56”

KTM-XX6 Series


Features

  • Low cost, Effective, Easy to use Keyboard based Digital timer
  • 3-Digits, Dual Row Display [Upper 3-Digit: Run time & Lower 3-Digit: Set time]
  • Programmable ON Delay/Interval/Cyclic/Forward-Reverse mode [with Hold time]
  • Programmable total time in Forward-Reverse mode
  • Programmable Front Reset
  • Programmable Output 2 functions : Auxiliary contact/End of cycle/Instant contact
  • Multiple Time Range: From 0.01 Sec. to 999 Hrs.
  • Time Setting via keyboard
  • Configuration at power on (To prevent unauthorized tampering)
  • Available in 5 Standard DIN sizes
  • Programmable timer start modes to suit various applications
  • Programmable No. of cycle in Cyclic mode
  • Programmable Up/Down counting
  • Programmable Auto Reset/Latch Output
  • Programmable Memory Backup
  • High Accuracy: 0.05% of Full scale (Repeat Accuracy: 0.01%)
  • Time base selection via keyboard
  • Independent time base for both cycles in Cyclic mode
  • Universal supply voltage ranges from 90 To 270 VAC
  • Specification

    KTM-6D
    Series Economical keyboard Counter
    Display Type 7 segment LED
    No. of Digits 4 Digits, Single Row
    LED Indication Output Status ; Batch/AR Time
    Dimensions Table no : 1
    Input Specification
    Start Input Power On, Pulse (Edge Trigger),Front Start (Programmable)
    Reset Input Front Key & Rear Terminal (Potential free)
    Accuracy Setting : 0.05% of Full scale Repeat : 0.01%
    Output Specification
    No. Of Outputs 3
    Output 1 Relay / SSR Factory settings
    Relay Contact Rating 5 A @ 250V AC/30V DC resistive
    Output 2 Relay / SSR Factory settings
    Relay Contact Rating 5 A @ 250V AC/30V DC resistive
    SSR 12 VDC @ 50mA
    Output 3 Relay / SSR Factory settings
    Relay Contact Rating 5 A @ 250V AC/30V DC resistive
    SSR 12 VDC @ 50mA
    Configuration Parameters
    Delay Modes On Delay/Interval/Cyclic ON time first/Cyclic OFF time first/Cyclic Hold-Forward-Hold-Reverse-Hold
    Time Range 9.99 Sec ; 99.9 Sec ; 999 Sec
    9.59 Min : Sec
    99.9 Min ; 999 Min
    9.59 Hrs : Min
    99.9 Hrs ; 999 Hrs
    Timer Start Modes Power On Start
    Pulse Start (Edge Triggered)
    Front Start Pulse Start (Edge +Level )
    Programmable No. of Cycle Applicable in On delay/Off delay CY1 & CY2 Mode Only
    Timing Accuracy 0.05 % Full scale
    Time Base Selection Through Keyboard
    Front Panel Reset Enable/Disable
    Memory Backup Enable/Disable
    Output 2 Configurable Auxiliary Contact
    Batch Mode
    Output 3 Applicable in CY1, CY2 & CY3 Mode
    General Specification
    Supply Voltage 90 - 270 VAC/DC
    24 VAC/DC (OPTIONAL)
    Temperature Operating 0 - 50°C
    Storage -20° to 75°C
    Humidity (Non-condensing) 95 % RH
    Weight
    Table no : 2